أمس, 01:20 AM
"The program may respond slowly due to packing. If the console screen appears blank, press ENTER once or twice and the interface will load."
? This C++ tool helps you dump and fix Enigma Protector–protected EXE files (tested from v5.x up to v7.80).
It automatically dumps the main executable from memory, resets critical PE structures like IAT, OEP, relocations, and more.
⚠️ Note: As of Enigma v7.80, the dumped EXE may not run correctly due to deeper anti-dump mechanisms. The tool still extracts valid memory and headers — allowing you to continue manually.
✅ What This Tool Does:
Performs multiple anti-debug checks (PEB, DebugPort, IsDebuggerPresent).
Suspends other threads for stable dumping.
Identifies and validates the main module in memory.
Detects inline hooks to prevent faulty dumps.
Dumps the full memory image of the main EXE.
Rebuilds PE headers:
Sets new OEP
Clears relocations, TLS, and resource sections
Resets checksum
Finds the section where OEP resides and logs it.
Performs a basic Import Address Table (IAT) rebuild.
Dumps all loaded DLLs into a Dumps/ folder for further analysis.
❌ Why the Dumped EXE May Not Work (Especially in 7.x):
Enigma uses dynamic unpacking, loading code in stages.
Real EntryPoint (OEP) may only be valid after several layers finish.
Some APIs remain encrypted or virtualized in memory, and aren’t dumped cleanly.
IAT fixing is basic — no redirection or advanced import fixing is handled.
.reloc, .tls, and .rsrc are cleared to avoid loader errors but may affect app logic.
?️ Manual Fixing Instructions:
If the dumped fixed_dump.exe doesn’t run:
Use a debugger like x64dbg:
Run the target until all UI/windows show.
Dump process memory manually from that point.
Get the actual OEP from the execution trace.
Use tools like:
Scylla or ImpREC to rebuild IAT manually.
PE-bear to fix headers or corrupt sections.
Patch anti-debug or integrity checks:
Most failures are due to runtime checks on dumped memory.
Patch .text or .vmp sections if needed.
? Future Improvements:
Full IAT reconstruction with thunk redirection
Delayed import and forwarded DLL fix
Resource rebuild or extraction
VM section cleanup (devirtualizer plugins)
? Output Files:
File Description
C++ Enigma Protector 5.x–7.x Dumper & PE Fixer Tool [Dump + Auto IAT + EP Repair]
dump_raw.bin Raw dumped memory of EXE
fixed_dump.exe PE header–repaired executable
Dumps/*.dll All loaded dependent DLLs dumped
? Tested On:
✅ Enigma 5.70
✅ Enigma 6.30
✅ Enigma 7.80
⚠️ Enigma
⚠️ Disclaimer:
This tool is meant for educational and reverse-engineering research purposes only.
Use it only on software you own or have legal rights to reverse-engineer.
Author is not responsible for misuse or any resulting damages
? This C++ tool helps you dump and fix Enigma Protector–protected EXE files (tested from v5.x up to v7.80).
It automatically dumps the main executable from memory, resets critical PE structures like IAT, OEP, relocations, and more.
⚠️ Note: As of Enigma v7.80, the dumped EXE may not run correctly due to deeper anti-dump mechanisms. The tool still extracts valid memory and headers — allowing you to continue manually.
✅ What This Tool Does:
Performs multiple anti-debug checks (PEB, DebugPort, IsDebuggerPresent).
Suspends other threads for stable dumping.
Identifies and validates the main module in memory.
Detects inline hooks to prevent faulty dumps.
Dumps the full memory image of the main EXE.
Rebuilds PE headers:
Sets new OEP
Clears relocations, TLS, and resource sections
Resets checksum
Finds the section where OEP resides and logs it.
Performs a basic Import Address Table (IAT) rebuild.
Dumps all loaded DLLs into a Dumps/ folder for further analysis.
❌ Why the Dumped EXE May Not Work (Especially in 7.x):
Enigma uses dynamic unpacking, loading code in stages.
Real EntryPoint (OEP) may only be valid after several layers finish.
Some APIs remain encrypted or virtualized in memory, and aren’t dumped cleanly.
IAT fixing is basic — no redirection or advanced import fixing is handled.
.reloc, .tls, and .rsrc are cleared to avoid loader errors but may affect app logic.
?️ Manual Fixing Instructions:
If the dumped fixed_dump.exe doesn’t run:
Use a debugger like x64dbg:
Run the target until all UI/windows show.
Dump process memory manually from that point.
Get the actual OEP from the execution trace.
Use tools like:
Scylla or ImpREC to rebuild IAT manually.
PE-bear to fix headers or corrupt sections.
Patch anti-debug or integrity checks:
Most failures are due to runtime checks on dumped memory.
Patch .text or .vmp sections if needed.
? Future Improvements:
Full IAT reconstruction with thunk redirection
Delayed import and forwarded DLL fix
Resource rebuild or extraction
VM section cleanup (devirtualizer plugins)
? Output Files:
File Description
C++ Enigma Protector 5.x–7.x Dumper & PE Fixer Tool [Dump + Auto IAT + EP Repair]
dump_raw.bin Raw dumped memory of EXE
fixed_dump.exe PE header–repaired executable
Dumps/*.dll All loaded dependent DLLs dumped
? Tested On:
✅ Enigma 5.70
✅ Enigma 6.30
✅ Enigma 7.80
⚠️ Enigma
⚠️ Disclaimer:
This tool is meant for educational and reverse-engineering research purposes only.
Use it only on software you own or have legal rights to reverse-engineer.
Author is not responsible for misuse or any resulting damages